• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a wood burning Fireplace Burning Stove

Wood stoves can be a great way to save energy and heat the room. However, they need an amount of care.

Many modern wood stoves conform to EPA emissions guidelines. You can check for an EPA sticker on the grate or under it to make sure your stove isn't releasing harmful pollutants.

How to Start a Wood Fire

The scent and sound of a woodfire can be an excellent addition to any house. It's essential to know how to build a fire on your stove. Improper techniques can result in an unburned fire that doesn't burn effectively and produces smoke or creosote. The tips below will aid you in starting the fire that will warm your home with minimum effort and ensure your security.

Make sure to check the condition of your coals and logs before you begin the fire. If they're damp it will dampen your fire and hinder proper burning. You might want to open the chimney to remove any ash that has fallen into the stove.

Begin by putting some small, dry newspaper pieces in your stove. This will help ignite the fire. Once these begin to burn, add another layer of larger pieces of kindling to the top of the pile. This should be done in a crosshatch pattern, so that there is air between each piece of wood.

If your wood stove is equipped with an automatic control for combustion, it will automatically feed air to the fire as it grows. This will enable the fire to burn at a steady rate without having to constantly open the stove's door to maintain it.

It's important to avoid using too much tinder, as this could result in the fire burning at an extremely high rate and fails to utilize the fuel as efficiently as possible. If you have a solid pile of tinder and some kindling in your stove, begin the main fire by laying two large wood burner logs of the base across the grill. Then, on the top of these base woods lay a layer parallel to them. This "top-down" method of creating the fireplace will create an effective and long-lasting fire that doesn't consume larger base logs.

Close the damper once your fire has been established and keep it closed. Doing this too soon could cause the fire to get smothered and not allow for the correct air flow, which can reduce its efficiency.

Adding Wood

Stoves aren't only beautiful pieces of home decor They can also help you save money by providing efficient wood heating. They can be used on their own or in conjunction with central heating or furnace system to provide the extra heat required in large wood burning stove houses or homes with multiple rooms. Many of the new stoves that burn cleanly available on the market use an advanced combustion principle which can separate the burning volatile substances from combustible gases and tar. This is accomplished by providing air at two different stages. The first stage is for the vaporization, while the second is to supply pre-heated fresh air. This improves combustion and reduces odors.

The amount of heat you get from a stove is contingent upon the species and moisture content of the wood used as well as the size of the logs. To let the wood dry, logs should be stored in a ventilated space for a few months before burning. If the logs are too wet, they will produce lots of steam, which is basically wasted energy.

While you're burning the fire, add more wood to the stack at intervals, but not all at once. Too much wood added at once causes the temperature inside the firebox to increase and creates a vortex that draws smoke and volatile compounds that have not been burned back into the flame, which can reduce the efficiency of your stove.

Avoid using other combustibles in your stove, such as cardboard or paper, because they are not wood. They have different physical properties and can't be burned without causing dangerously high temperatures. Also, avoid using compressed combustibles, such as wood briquettes because they have a distinct physical and chemical composition from actual firewood and are not approved for burning in wood-burning stoves.

It is crucial that a professional install and test your wood burning stove. A certified WETT technician will examine your stove to make sure that it is safe and efficient. They will also check that your chimney works correctly. They provide maintenance services for your chimney and stove to ensure they remain in top condition. They can inspect the areas accessible to your chimney for leaks, and fix any issues found. They will also ensure that the occupants of your home understand and comply with the evacuation procedures for fire in case of an emergency.

Adjusting the Damper

A damper controls the amount of heat that is lost to the chimney when you aren't using your stove. Additionally, it can also help you control the fire. If the flue is opened but the damper is closed too much the fire won't burn properly and it will release smoke into your living space. You can adjust the damper to ensure the best flames by testing different locations.

You want to keep your damper open to let air flow into and out of the flue when a fire is burning. This lets the fire get going and helps it stay in good shape so that you can enjoy it for a long time. The proper opening will stop the fire from becoming starved of air and will keep it from blowing out smoke.

To adjust your damper correctly first, make sure that the fireplace has been preheated and the wood stove is hot. This will ensure that the chimney stays warm and has good draft. Once this is done the damper for the wood stove may be adjusted.

After the fire has burned for some time, you need to close the damper approximately three quarters of the way. This will prevent the warm air in the room from venting up the chimney while still allowing smoke to escape out of the wood stove.

This is the best way to keep the fire from getting too hot, while also keeping it burning. If you shut the damper too tightly, it could stop the draft from working, but should it be too open a cold breeze could blow through your home.

Placing your hand on the top of the flue pipe will tell you how much the damper has sunk. If you feel a small breeze pushing against your palm, the damper is likely in an open position.

The damper settings can differ between stoves and even between different kinds of wood. The process of experimenting with the various settings will give you an idea of what you should look for, but you may need to adjust until you get the ideal setting for your stove.

Clean up

After the fire, it's essential to clean the stove and flue. This will help lower the risk of a chimney fire which is the most common reason for wood stove fires in homes. Creosote is a sticky material that accumulates on the inside of the stovepipe and is extremely dangerous. The moisture and the unburned parts of wood that cannot escape the fire are the cause for this substance. This can also occur when fires aren't lit properly.

Regular cleaning helps stop the buildup of creosote. This can be accomplished by sweeping your chimney at least once every year. It is also recommended that you have your stove and fireplace professionally cleaned and examined at least every year.

It is also recommended to clean the ash tray and the grates regularly. It is recommended to only use seasoned wood to burn, since this will result in less creosote and wood burning fireplace less ash. It is also recommended to avoid burning cardboard, paper plastic, and other waste items. They can release chemicals that are dangerous for the respiratory tract and the air, which could be released into your home.

The glass that is used on the wood burning stove needs to be cleaned frequently as well. Many newer wood stoves have self-cleaning glass, which means that they do not require any scrubs. If you are not able to clean the glass of your wood stove as clean as you would like, there are stove glass cleaners can be used on the window.

Other helpful tips to maintain your wood stove include turning the vent down when you are not using it and slamming the door or window to increase the flow of air. This will help keep the fire burning longer and more efficiently since it won't need to exert as much effort to circulate air. It is a good idea not to stack logs or leave them on the fire for an extended duration. This could cause splits and warping. Finally, it is recommended to avoid using compressed combustible wood logs in your wood stove as the paraffin they contain can melt and then flow down into the flue, which could damage it.